FS: Focusrite Trakmaster Platinum & Studio Projects C1 Condensor Mic

[Bryan M]

FocusRite Trakmaster






Mic input

• Gain: –3 dB to +57 dB
• Frequency Response: 0 dB at 20 Hz and –3 dB at 250 kHz.
• THD+N: 0.002% (measured at 1kHz using 20 Hz/22 kHz bandpass filter)
• Noise: EIN = -121 dB (measured at 57 dB of gain with 150 Ω source impedance and 20 Hz/22 kHz bandpass filter)

Line input

• Gain: –10 dB to +10 dB
• Frequency Response: 0 dB at 20 Hz and –3 dB at 200 kHz.
• THD+N: 0.003% (measured at 1kHz using 20 Hz/22 kHz bandpass filter)
• Noise: -94 dBu (using 20 Hz/22 kHz bandpass filter)

Instrument input

• Gain: –3 dB to +40 dB
• Frequency Response: 0 dB at 20 Hz and –3 dB at 200 kHz.
• THD+N: 0.007% (measured at 1 kHz using 20 Hz/22 kHz bandpass filter)
• Noise: -94 dBu (using 20 Hz/22 kHz bandpass filter)

Bass EQ (VOCAL mode)

• Bell EQ
• Frequency range: 50 Hz to 800 Hz
• Boost/Cut: +12 / -14 dB

Bass EQ (INST mode)

• Shelving EQ
• Frequency range: 25 Hz to 400 Hz
• Boost/Cut: +12 / -14 dB

Presence EQ

• Bell EQ
• Frequency: 1.5 kHz
• Boost/Cut: +12 / -20 dB

Treble EQ

• Shelving EQ
• Frequency (VOCAL mode): 10 kHz
• Frequency (INST mode): 3.3 kHz
• Boost/Cut: +/- 14 dB

Optical Compressor

• Threshold (COMRPESSION control): -22 dB (MORE) to +12 dB (LESS)
• Ratio (TIGHT switch out): 3:1, soft knee
• Ratio (TIGHT switch in): 6:1, hard knee
• Attack (PUNCH switch out): 3ms
• Attack (PUNCH swtich in): 45mS
• Release: 100 mS (FAST) to programme-dependent slow (SLOW)
• Makeup gain +20 dB.

Weight

• 4.5 kg

Dimensions

• 44 mm (H) x 480 mm (W) x 265 mm (D)

Outputs

• Balanced: impedance 50W, nominal level +4dBu
• Unbalanced: ground compensated, impedance 75W, nominal level –10dBV

Headroom

• 22 dB

www.focusrite.com

Studio Projects C1 Condensor Mic

Specifications
Type:

Pressure gradient solid state condenser microphone
Polar pattern:
Cardioid.
Frequency response:
20~20000Hz.
Sensitivity:
14mV/Pa=-37dB(0dB=1V/Pa).
Output impedance:

<200 Ohm.
Load impedance:
>1000 Ohm.
Maximum SPL:

142dB SPL for 1% THD @1000Hz(0dB SPL=0.00002Pa).

Noise:

(Line): 27dB (A weighted)---17dB.

S/N:

77dB.

Power requirement:

48 +/- 4V.

Current consumption:

<2.5mA.

Circuit:

Discrete FET balanced symmetrical output.

Connector:

Gold-plated 3-pin XLR

Size:

dia: 2.1" length: 8.9"

Weight:

26.9oz

Pad:

-10dB

Low cut :

6dB/Octave at 150 Hz.





xcellent package, will include a rack for the pre amp, as well as mic cable and 1/4 inch jacks!



best offer will take this package,



ONLY SERIOUS OFFERS PLEASE this equipment must be gone :D





also have a almost brand new comuter desk for sale, all steel and glass, L shaped table! (very mint:D)



cheers for now!

~Bryan Mckinlay